Tech Support»Troubleshooting Guides
fetco fetco
Error Codes
Code Description
001 Internal Error: System had to reload default settings
050 Shorted Temperature Probe
051 Open Temperature Probe
075 Brew basket lock or sensor failure 
100 Initial Fill Error: Initial fill time was more than 15 minutes
101 Error on Refill: Tank did not refill with in 3 minutes
102 Unwanted Fill: When brewer is idle, the fill valve was activated for more than 30 seconds during a 1 hour period
200 Flat Line Temperature: (Water is Boiling)  System is calling for heat, but the temperature does not rise at least 2°F within 10 minutes
201 Heater Open: System is calling for heat but the temperature does not rise at least 2°F within 10 minutes
202 Relay/Triac Stuck Closed: System is not calling for heat, but temperature rises more than 5 degrees
255 Key Pad Error: A switch was pressed for more than 45 seconds

Dispenser Troubleshooting


Brewer Troubleshooting




Temperature Troubleshooting
cstore
podcasts
new products
beverage consultation
© 2008 Food Equipment Technologies Company | privacy policy | trademarks | 1.800.FETCO.99 | site map
podcasts bev consultation new products cstore fetco